CMRV040+V02-632- 4- 0.18 kW- 4.5-22 rpm Worm variable speed gear motor
4.473,13 kr.*
ca. 3-4 hverdage ca. 3-4 hverdage {1}Leveringstid
Information om produktet "CMRV040+V02-632- 4- 0.18 kW- 4.5-22 rpm Worm variable speed gear motor"
Worm variable speed gear motor, power= 0.18 kW, speed= 4.5 - 22 rpm,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% in accordance with VDE 0530),
Protection class= IP55, insulation class= F (155°C), operating mode= S1, duty cycle= S1- 100%, total length= approx. 415 mm,
Hollow shaft= 18 mm, motor speed= 4 pole, gear ratio with adjustment unit (i)= 46 - 328,
Gear ratio only worm gear (i)= 40, torque= 37 Nm – 62 Nm, operating factor (f.s.)= 1,
Terminal box = top (rotatable), weight = 12 kg, color = RAL 5010 (gentian blue),
Temperature sensor = 3 x PTC thermistors, gear housing = aluminum, ball bearings = SKF, C&U or equivalent,
Cooling = axial fan (plastic). The drive complies with IEC 60034-30:2008,
is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts must be closed with a cover cap. This can be ordered under the "Accessories" section. In accordance with VDE 0105
or. IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel.
As is usual with variable speed drives, speed control by turning the handwheel is only permitted during operation!
A speed change when the drive is at a standstill can lead to damage to the stepless adjustment unit.
All product photos are non-binding examples! Technical changes reserved.
| Control range: | here. 4 bis 25 rpm |
|---|---|
| Performance: | 0,18 kW |
| Series: | CMRV-series |
| Shaft diameter: | 18 mm |
| Control range: | here. 4 bis 25 rpm |
|---|---|
| Performance: | 0,18 kW |
| Series: | CMRV-series |
| Shaft diameter: | 18 mm |
Tilbehør
