CMRV050 802-4 - 0.75 KW - 28 to 336 rpm- Worm Gearbox Inverter-motor alpha
5.697,72 kr.*
efter anmodning efter anmodning {1}Leveringstid
Downloads
- JS- CMRV050- Maßzeichnung / Data sheet
- JS- Elektromotor- MX3 802- Datenblatt / Data sheet
- JS- EASYdrive- Frequenzumrichter- Datenblatt
- JS- CMRV-Serie- Betriebsanleitung
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
- JS- MMI- Externes Bedien- / Programmiergerät
- JS- EASYdrive- Alpha- Frequenzumrichter- Bedienungsanleitung
- JS- MMI- External Operating- / Programming Device
- JS- EASYdrive- Alpha- Frequency Inverter- Operation Manual
- JS- PC-Software (nur mit Parametrierkabel möglich)
Information om produktet "CMRV050 802-4 - 0.75 KW - 28 to 336 rpm- Worm Gearbox Inverter-motor alpha"
Worm Gear Motor, Power= 0,75 KW, Speed= 28 to 336 rpm,
Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,
Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 23 Nm,
Service factor (f.s.)= 2,7 . Terminal box= top (rotatable), Weight= 15,5 kg, Paint= RAL 5010 (gentian blue),
Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent,
Frequency inverter
Power= 0.75 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,
Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,
Mains current (input)= 7.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for cooling
needed.
Product Information
The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules.
With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.
The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control
environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts
without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).
! Possible variant selection!
Product selection
When selecting the frequency converter, make sure that there are 2 variants. First, this includes the device
in the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometer
installed on the side.
The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.
For this purpose, one of the following options must be ordered::
- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter
The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,
such as Start-stop, left-right-run etc.
For parameterization, one of the following options must also be ordered::
- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter
Important notes
This drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!
All product photos are non-binding examples!
| Control range: | here. 28 bis 336 rpm |
|---|---|
| Performance: | 0,75 kW |
| Series: | EASYdrive Alpha 0,18kW - 0,75kW |
| Shaft diameter: | 25 mm |
| Tension: | 1 x 230 V |
| Torque: | 26 to 50 Nm |
| Control range: | here. 28 bis 336 rpm |
|---|---|
| Performance: | 0,75 kW |
| Series: | EASYdrive Alpha 0,18kW - 0,75kW |
| Shaft diameter: | 25 mm |
| Tension: | 1 x 230 V |
| Torque: | 26 to 50 Nm |
Accesories
