Electric motor IE3 180L-4, 22 kW, 4 pol, B35

8.309,08 kr.*

Priser inkl. moms plus forsendelsesomkostninger

Produktnummer: 2M23181219A000

Downloads

Information om produktet "Electric motor IE3 180L-4, 22 kW, 4 pol, B35"

Electro motor, Three-phase motor, Power= 22 kW, Speed= 1500 rpm

Shaft= 48 x 110 mm, Voltage= 3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz.

Efficiency class= IE3, Efficiency= 93,0%, Paint= RAL 5010 (gentian blue), Degree of protection= IP55, Temperature sensor= 3 x PTC thermistors,

Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F (155°C),

Ball bearing= SKF or equivalent, Cooling= axial fan (Plastic), Motor feet= screwable (if available).

The engine mounting is designed for clutch operation. We recommend reinforced Cylindrical roller bearings for belt drives.

The Electric motor is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

All product photos are non-binding examples! Technical changes reserved.

Ambient temperature:	40 °C
Direction of rotation:	Left, Right
Efficiency Class:	IE 3
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	22 kW
Protection class:	IP55
Rotation speed:	1500 rpm / 4 polig
Series:	new series
Shaft diameter:	48 mm
Shaft dimensions:	48 x 110 mm
Tension:	3 x 400/690 V
Type of construction:	B3 B5 (B35)
Weight:	176,0 kg

Ejendomme "Electric motor IE3 180L-4, 22 kW, 4 pol, B35"

Ambient temperature:	40 °C
Direction of rotation:	Left, Right
Efficiency Class:	IE 3
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	22 kW
Protection class:	IP55
Rotation speed:	1500 rpm / 4 polig
Series:	new series
Shaft diameter:	48 mm
Shaft dimensions:	48 x 110 mm
Tension:	3 x 400/690 V
Type of construction:	B3 B5 (B35)
Weight:	176,0 kg

Tilbehør

Regnskærm BG180

Ventilatorafskærmning med regndæksel til elmotorer i størrelse 180 Ved bestilling med elmotor monteres regnskærmen direkte på elmotoren. Alle produktbilleder er ikke-bindende eksempler! Der tages forbehold for tekniske ændringer.

1.204,63 kr.*

Detaljer

Slide rails sice 160/180

Motor mounting rails for size 160-180 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 686 mmSlide length: 538 mmWeight: approx. 12.8 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

1.496,42 kr.*

Detaljer

Spændeslidse IEC180-200

Spændeslidse til elmotorer i størrelserne IEC180 til 200 Mål: 490 x 410 x 40 mm (LxBxH) Vægtkapacitet: 282 kg Vægt: ca. 10,8 kg Monteringsposition: vandret og lodret Motoriserede spændeskinner bruges til remtræk. De motoriserede spændeskinner er lavet af en stålkonstruktion og galvaniseret. De gør det nemt at justere motoren til remskiven, når drevet skal sættes op. Spændeskinnerne passer til næsten alle motortyper og er kendetegnet ved et fladt og kompakt design. Alle produktbilleder er uforpligtende eksempler!

1.787,05 kr.*

Detaljer

Termisk sensoråbner NAT 130°C 3-vejs op til BG315

PTO-termoføler - 3-vejs, normalt lukket kontakt til motorviklingen Normalt lukket kontakt, med isoleringshætte, automatisk nulstilling, Til motorer i størrelserne 160 til 315. Når den fabriksindstillede nominelle koblingstemperatur (NST) nås, springer en bimetalskive pludselig fra sin stabile startposition til en stabil slutposition og aktiverer koblingsmekanismen. Når temperaturen falder til under den fabriksindstillede nulstillingstemperatur (RST), springer koblingsmekanismen tilbage til sin stabile startposition ved . Kun mod tillæg! Kan ikke bestilles separat.

762,14 kr.*

Detaljer

Varmebånd 160-225

Varmebånd til stilstandsvarmer til elmotorer i størrelse 160-180-200-225 Stillstandsvarmeren bruges til at forhindre dannelse af kondensvand Kondens under driftspauser.

1.354,11 kr.*

Detaljer

Cylindrisk rulleleje BG180

Cylindrisk rulleleje, A-side Forstærket leje til elmotorer i størrelse 180. For at understøtte øget radial belastning. Minimumsbelastning på 20 % påkrævet!

1.132,79 kr.*

Detaljer

1-JS-IP66-11KW-15KW-18,5KW-22KW-Frequency-Inverter

LS 0220S100-4EXFNS frekvensomformer

Frekvensomformer, 22,0 kW, 3 x 400 Volt, IP66, indbygget LED-kontrolpanel, EMC-filter (C3) Beskyttelsesklasse IP66/NEMA4X med integreret hovedafbryder udvidede sensorløse kontrolfunktioner højt startmoment på 200 % selv ved 0,5 Hz høj effekttæthed, kompakte dimensioner, montering gennem hul integreret EMC-filter (C3) Overensstemmelse med globale standarder CE, UL, cUL Brug Heavy Duty 150% i løbet af 1 min eller Normal Duty 120% i løbet af 1 min Autotuning-funktion ved stilstand eller rotation Integreret sikkert stop "STO" (Safe Torque Off), redundant indgangskredsløb integreret display med enkel betjening, mulighed for eksternt fjerndisplay Smart kopifunktion, hvor S100 ikke behøver at være strømførende enkel udskiftning af ventilator med automatisk visning af udskiftningstidspunkt PLC-sekvenser programmerbare med funktionsblokke digital og analog I/O, Modbus TCP, Ethernet/IP, Profibus DP, CANopen (under forberedelse: Profinet, EtherCAT)

16.877,10 kr.*

Detaljer

Frequency Inverter LS 0220S100-4EOFNS

Frequency inverter, 22.0 kW, 380V- 400V- 420V- 480V, IP20, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

10.903,63 kr.*

Detaljer

Frequency Inverter LS 0220H100-4COFN

Frequency inverter for pump / fan operation, 22 kW, 400V, IP20, EMC filter (C3) Specific functions for pumps and fans- MMC function (control of several motors)- Time switch function (time event: real-time clock)- flow compensation- gentle filling- Initial acceleration & final acceleration- valve down ramp- Pump cleaning- load balancing- Fire mode- Energy saving display (amortization counter)- Boost, wake-up function- U / f control- Integrated BACnet communication- LonWorks (optional)- Control panel especially for pumps / fans- Integrated EMC filter / DC reactor- Side by side installation- Intermediate plate option- Small size- Condenser / fan life monitoring function- Smart Copy function (flash drop, download of parameters andof the main operating system possible without Voltage) >

9.986,81 kr.*

Detaljer

Frekvensomformer LS 0220-iS7-4-SOFD

IS7 frekvensomformer - allrounderen 22 kW, 3x400V, 45A, bremsemodstand, EMC-filter, IP21, DC link choke (DC-reaktor), med kontrolpanel. : konstant drejningsmoment/variabelt drejningsmoment til normal belastning og tung drift ● V/f- og V/f-PG-styring, sensorløs vektorstyring, vektorstyring med sensorvalg ● 150 MIPS højhastigheds-DSP ● Fremragende ydelse og avancerede funktioner Droop-styring (drejningsmomentstyring) KEB-beskyttelse (Kinetic Energy Buffering: : Opbevaring af kinetisk energi) Ride Through-beskyttelse (forsinkelse af underspændingsudløsning) Under Load Trip-beskyttelse PMSM-funktion (Permanent Magnet Synchronous Motor) Vektorstyring uden feedback Effekt- og fluxbremsefunktion (effekt- og fluxbremse) Automatisk justering Autotuning af statiske motorparametre :let at betjene Enkel starttilstand, bruger- og makrogruppe, multifunktionelt kontrolpanel ● Sensorløs styring og parameterindstilling af den anden motor ● Tilgængelig:: IP54/UL-beskyttelsestype 12 som tilvalg (0,75~22kW[1~30hk]) * ● Integreret kommunikation RS485 (LS Bus / Modbus RTU) ● Integreret transistor til dynamisk bremsning (0,75~22kW[1~30hk]) ● Integreret EMC-filter og DC-reaktor som tilvalg EMC-filter (0,75~22kW[1~30hk]) ● Integreret DC-reaktor som tilvalg (0,75~22kW[1~30hk]),: 75~22kW[1~30hp]) / DC-reaktor (0,75~160kW[1~215hp]) Bredt, grafisk LCD-kontrolpanel (6 forskellige sprog) PLC PLC-udvidelseskort valgfrit (programmerbart logisk kontrolkort) Master-K-platform (maks.::14 indgange og maks. 7 udgange) ● Input/output-udvidelseskort (ekstraudstyr) maks. 11 indgange og maks. 6 udgange ● Valgfri kommunikation Profibus-DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP * Software (Drive View) til overvågning og parametrering på pc'en

13.042,74 kr.*

Detaljer

Soft start device 22 kW SSCi-048-V6-C1

Performance data Rated current= 48 A, input voltage= 200 - 575 VAC, protection class= IP20, 22 kW,Installation altitude= <1000 m, dimensions (H x W x D)= 201 x 98 x 165 mm, weight= 2.2 kg, Settings • Current ramp - current value and ramp time• Electric motor current limit• Overload protection trip time• Motor current FLC (full load current)• Ramp stop time• Expected motor start time• Auxiliary relay function Basic Advantages • soft voltage start• easy voltage stop• built-in bypass• current limitation for soft start• soft start plus (limit values adjustable)• thermal motor protection• connection of a motor sensor (thermistor).• 2 relay outputs• protection against exceeding the start-up time All product photos are non-binding examples! Technical changes reserved.

4.264,21 kr.*

Detaljer

Frequency inverter ED400-1850

Frequency Inverter, 3x 400V, EASYdrive 18.5 kW Frequency inverterPower= 18.5 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 40.0 A, Mains current (input)= 33.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. All product photos are non-binding examples! Technical changes reserved.

Fra 17.331,40 kr.*

Detaljer