Frequency inverter ED400-0055

4.040,01 kr.*

Priser inkl. moms plus forsendelsesomkostninger

efter anmodning efter anmodning {1}Leveringstid

Model

Produktnummer: ED400-1.7-GH01DKM

Downloads

Information om produktet " Frequency inverter ED400-0055"

Frequency Inverter, 3x 400V, EASYdrive 0.55 kW

Frequency inverter
Power= 0.55 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,
Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,
Rated current output, eff. [IN at 8 kHz]= 1.7 A, Mains current (input)= 1.4 A,

Product Information
The Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.
With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments.
The required optional control variant must be specified when ordering.
The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measures
the EMC class C2 (with 1-phase mains supply).

! Possible variant selection!

Product selection
When selecting the frequency converter, make sure that there are 3 variants. First, this includes the device
in the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI
operating unit.

The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,
but needs to control a corresponding control panel.
For this purpose, one of the following options must be ordered:
- External control device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,
such as start-stop, left-right running, etc.
One of the following options must also be ordered for parameterization:
- External control device (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,
in addition, a display is included in the device cover. The mentioned options can be used if required.

All product photos are non-binding examples! Technical changes reserved.

Performance:	0,55 kW
Protection class:	IP65
Series:	EASYdrive ED400 0,55kW - 22,0kW
Tension:	3 x 400 V

Ejendomme " Frequency inverter ED400-0055"

Performance:	0,55 kW
Protection class:	IP65
Series:	EASYdrive ED400 0,55kW - 22,0kW
Tension:	3 x 400 V

Tilbehør

EASYdrive-Bluetooth-Adapter

Bluetooth adapter for EASYdrive The EASYdrive offers a Bluetooth interface that integrates as a plug-in variant via the M12 can be. -only additional price, cannot be ordered individually- (image only product example) All product photos are non-binding examples! Technical changes reserved.

1.120,71 kr.*

Detaljer

EASYdrive MMI håndholdt kontrolenhed

Manuel styreenhed MMI, inkl. spiralkabel 0,5 m, med M12-skruekobling Følgende funktioner er mulige med EASYdrive MMI: - Parametrisering af enhedens indstillinger - Styring (f.eks. låsning og frigørelse) - Visning af forskellige procesvariabler - Lagring af parametersæt (maks. 8) - Overførsel af parametersæt til andre INVEOR'er (Illustration kun produkteksempel)

1.269,39 kr.*

Detaljer

EASYdrive Touch betjeningsterminal

Touch-betjeningsterminal til EASYdrive-frekvensomformere Den 7" touch-betjeningsterminal i mørkegrå er specielt designet til betjenings- og overvågningsopgaver inden for alle områder af industriel automatisering.Det blæserløse system med 32-bit Cortex A8-processor og 600 MHz clock har masser af computerkraft og imponerer med behageligt hurtigt sideskift.Projekteringssoftwaren "EasyBuilder Pro" stiller ingen særlige krav til din pc, er nem at bruge og fås gratis. 7" TFT LCD-grafikskærm 800 x 480 pixels LED-baggrundsbelysning Robust plastikhus Ventilatorløst kølesystem Ur i realtid RTC IP65-front, NEMA4-kompatibel Ethernet 10/100 BaseTX RS485 USB-vært Alle produktbilleder er ikke-bindende eksempler! Der tages forbehold for tekniske ændringer.

3.832,11 kr.*

Detaljer

EASYdrive-parametriseringskabel

Parametreringskabel USB PC USB-kabel med interface-konverter PC-software tilgængelig som gratis download Alle produktbilleder er uforpligtende eksempler! Der tages forbehold for tekniske ændringer.

1.120,71 kr.*

Detaljer

EASYdrive-forlængerparameteriseringskabel 5 m

Forlængerkabel 5 m, til EASYdrive-parametreringskabel kun i brug med Art. ED-PC-PARA Kan bruges som forlængelse -> PC-forbindelse Kan bruges som forlængelse -> MMI-forbindelse Kan forlænges op til 50 m

346,70 kr.*

Detaljer

EASYdrive-breaking resistor BG A

Brake chopper with braking resistor size A for EASYdrive. 100 W, 100 ohms; IP65, connecting cable 510mm, L = 110mm W = 80mm H = 15mm. -only additional price, cannot be ordered individually- All product photos are non-binding examples!

723,58 kr.*

Detaljer

EASYdrive CANopen

CANopen interface card for EASYdrive. The CANopen bus system belongs to the fieldbus family and is based on the CAN bus (Controller Area Network). As a rule, the network is built up in a linear structure. The maximum data transfer rate on a CANopen bus can be up to 1 Mbit / s and depends on the cable length. A maximum of 127 participants may exist in the bus association. Including M12 connection cable open 2 m, M12 connector / open / CANopen / 5-pin / 2 m / A-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

367,18 kr.*

Detaljer

EASYdrive Sercos III

Sercos III interface card for EASYdrive. The Sercos III bus system belongs to the fieldbus family. Usually the network built in a linear structure. The maximum data transfer rate on a Sercos III bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

2.587,39 kr.*

Detaljer

EASYdrive EtherCAT

EtherCAT interface card for EASYdrive. The EtherCAT bus system belongs to the fieldbus family. Usually the network is in linear structure. The maximum data transfer rate on an EtherCAT bus can up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

2.587,39 kr.*

Detaljer

EASYdrive Profibus

Profibus interface card for EASYdrive. Communication interface. With the help of PROFIBUS, devices from different providers can be customized communicate. PROFIBUS independently distinguishes between master and slave devices, so that multi-master operation is also possible. Including M12 connection cable open 2 m, M12 connector / open / Profibus / 5-pin / 2 m / B-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

2.587,39 kr.*

Detaljer

Adapter plate EASYdrive size A

Adapter plate EASYdrive size A Adapter plate for motor mounting for size A, with integrated motor terminal board and PTC connection, unprocessed version, short bridge. All product photos are non-binding examples! Technical changes reserved.

435,13 kr.*

Detaljer

Adapter plate EASYdrive size A wall

Adapter plate EASYdrive size A Adapter plate for wall mounting for size A, with integrated motor terminal board and PTC connection, unprocessed version, short bridge. All product photos are non-binding examples! Technical changes reserved.

566,00 kr.*

Detaljer

Fodkontakt med metalhus F1-AU0-10V

Nominel driftsspænding Ue 12-26 V DC Anvendelseskategori DC-13 Ue /Ie 12-26 DC / 0,2 A i henhold til IEC/EN 60947-5-2 Udgangsspænding (kontrolområde) 0-10 V DC Kortslutningsbeskyttelse Koblingselement permanent kortslutnings- og overbelastningssikret Beskyttelsesklasse IIIM UB GND RL U-OUT U-OUT Hus trykstøbt aluminium; dæksel trykstøbt aluminium Betjeningselementer Fodpedal (PA) Miljø overbelastningssikker, intermitterende Beskyttelsesklasse IIIM UB GND RL U-OUT U-OUT Hus trykstøbt aluminium; dæksel trykstøbt aluminium Betjeningselementer Fodgreb (PA) Omgivelsestemperatur -30 °C til +80 °C Kontakttype PNP NO-kontakt, indlærbar fra 0,1 - 5,9 mm Skiftekraft pedal ca.10 N (pedalcenter) Mekanisk levetid 10 x 106 koblingscyklusser Koblingsfrekvens max.50/min; fastgørelse 2 skruer M8 Tilslutningstype skrueforbindelser (M3,5) Antal tilslutninger 4, ledertværsnit massiv 0,5 - 1,5 mm2 Snoet ledning med ledningsendestykke 0,5 - 1,5 mm2, kabelindføring 1 x M20 x 1,5 Vægt ˜ 1,5 kg, beskyttelsesklasse IP65 i henhold til IEC/EN 60529 Tegning ID: Z030

3.615,64 kr.*

Detaljer